For a long time I wrote how to configure the ASUS RT-N12 wireless router for Beeline, but then they were slightly different devices and they were supplied with a different firmware version, and therefore the configuration process looked a little different.

To reset the ASUS RT-N12 D1 to its default settings, you have to do the following steps: Put router into operation Press Reset button for at least 6 seconds Restart of the device is automatically executed.

At the moment, the current revision of the Wi-Fi router ASUS RT-N12 is D1, and the firmware from which it enters the store is 3.0.x. We will consider setting up this particular device in this step-by-step instruction. Setting does not depend on what operating system you have - Windows 7, 8, Mac OS X or something else.

ASUS RT-N12 D1 Wireless Router

Video - Configuring ASUS RT-N12 Beeline

Reset button on your wireless router to reset it to its factory default settings. By default, the login username and password for your wireless router's Web GUI is admin. For details on changing your wireless router's login username and password, refer to section 4.7.2 System. The wireless router's login username and password allows you to. Rear (RT-N12 D1) Label Description Press this button for more than five seconds to restore the system to its factory default settings. Reset Press this button to power on/off the wireless router. Power Insert the AC adapter into this port to connect your router to a power source. How to hard reset ASUS RT-N12. In order to reset the ASUS RT-N12 to its factory settings 1. Find the reset button on the rear of the router 2. Press and hold the button for more than 5 seconds. The default factory settings are: Default username: admin Default password: admin Enable DHCP: Yes Default IP address: 192.168.1.1 Default subnet mask. Open a browser and enter the IP address 192.168.1.1 to login the router configuration page. Click on Wireless under the Advanced Settings section of the menu. Click on the Professional tab. Select 5GHz in the Frequency field.

It may also be useful:

• Setting up ASUS RT-N12 in the old version
• ASUS RT-N12 firmware

To begin with, I propose to watch the video instruction and, if something remains unclear, below all the steps are described in great detail in text format. Including there are some comments on typical errors when setting up the router and the reasons for which the Internet may be unavailable.

Connecting the router to configure

Despite the fact that connecting the router is not so difficult, just in case, I will stop at this point. On the back of the router there are five ports, one of which is blue (WAN, Internet) and four others are yellow (LAN).

The Beeline ISP cable should be connected to the WAN port.

I recommend setting up the router itself via a wired connection, it will save you from many possible problems. To do this, connect one of the LAN ports on the router to the network card connector of the computer or laptop with the included cable.

Before you configure ASUS RT-N12

Some things that will also contribute to the successful configuration and reduce the number of issues related to it, especially for novice users:

• Neither during the setup nor after it, do not start the Beeline connection on the computer (the one that was usually used to access the Internet), otherwise, the router will not be able to establish the necessary connection. Internet after setting will work without running Beeline.
• Better if you configure the router via a wired connection. And connect via Wi-Fi when everything is set up.
• Just in case, go to the connection settings used to communicate with the router, and make sure that the TCP / IPv4 protocol settings are set to 'Obtain an IP address automatically and get the DNS address automatically.' To do this, press the Win + R keys on the keyboard (the Win key with the Windows logo) and enter the command ncpa.cpl, then press Enter. Select from the list of connections the one through which you are connected to the router, for example 'Local Area Connection', right-click on it and select 'Properties'. Then - see the picture below.

How to enter the router settings

Plug the router into a power outlet after you have taken into account all the above recommendations. After this, two variants of events are possible: nothing will happen, or a page will open like in the image below. (At the same time, if you have already been on this page, it will open somewhat differently, immediately proceed to the next section of the instruction). If, like me, this page will be in English, you cannot change the language at this stage.

If it does not open automatically, launch any browser and type 192.168.1.1 in the address bar and press Enter. If you see the login and password request, enter admin and admin in both fields (the specified address, login and password are written on the sticker below ASUS RT-N12). Again, if you are on the wrong page that I mentioned above, go straight to the next section of the manual.

Change administrator password ASUS RT-N12

How To Reset Asus Rt-n12 Router Password

Click the 'Go' button on the page (in the Russian version the inscription may differ). At the next stage, you will be prompted to change the default admin password to something different. Do this and do not forget the password. I will note that this password will be needed to enter the settings of the router, but not for Wi-Fi. Click Next.

The router will begin to determine the type of network, then offer to enter the wireless network name SSID and put the password on Wi-Fi. Enter them and click 'Apply'. If you are setting up a router over a wireless connection, at this point the connection will break and you will need to connect to the wireless network with the new settings.

After that, you will see information about which parameters have been applied and the 'Next' button. In fact, ASUS RT-N12 incorrectly determines the type of network and you have to manually configure the Beeline connection. Click Next.

Beeline connection setup on Asus RT-N12

After you click 'Next' or after re-entering (after you have already used automatic configuration) the entrance to the address 192.168.1.1 you will see the following page:

ASUS RT-N12 Settings Main Page

If necessary, if, like me, the web interface is not in Russian, you can change the language in the upper right corner.

In the left menu, select 'Internet'. After that, set the following Internet connection settings from Beeline:

• WAN connection type: L2TP
• Obtain an IP address automatically: Yes
• Connect to the DNS server automatically: Yes
• Username: your login Beeline, starts at 089
• Password: your password Beeline
• VPN server: tp.internet.beeline.ru

Beeline L2TP connection settings on ASUS RT-N12

And click 'Apply'. If all the settings have been entered correctly, and the Beeline connection on the computer itself is broken, then after a short time, accessing the 'Network Map', you will see that the Internet status is 'Connected'.

Wi-Fi network setup

You could have done the basic settings of the wireless network settings of the router at the stage of the automatic configuration of ASUS RT-N12. However, at any time you can change the password for Wi-Fi, the network name and other settings. To do this, simply open the item 'Wireless Network'.

Recommended options: Adobe acrobat 9 pro serial number free.

• SSID - any desired wireless network name (but not Cyrillic)
• Authentication Method - WPA2-Personal
• Password - at least 8 characters
• Channel - you can read about channel selection here.

Wi-Fi Security Settings

After applying the changes, save them. That's all, now you can access the Internet from any device equipped with Wi-Fi module by connecting to your wireless network.

How To Factory Reset Asus Router

Note: to configure Beeline's IPTV television on ASUS RT-N12, go to the 'Local network' item, select the IPTV tab and specify the port for connecting the set-top box.

How To Reset Asus Rt N12 Router

It may also come in handy: typical problems when setting up a Wi-Fi router